Cortelco CP4400 - Manual (Page 11)

11
Memory Dial
The CP4400 provides 20 memory dial locations. Each location can store up to 31
digits.
Storing a Memory Dial Number
With the phone on-hook, follow the steps below to store a memory dial number.
1
Press STORE. The Memory LED will blink. The screen will display GROUP
(01-20).
2 Dial a 2 digit storage location. This number must be between 01 and 20.
3. If the location is empty, skip to step 7. If a number is already stored in this
location, it will be displayed at this time.
4. Press STORE. The display will show BEGIN CANCEL.
5. Use VOL+ VOL- to select BEGIN to enter a new number or CANCEL to exit
without changing the number.
6. Press STORE. If CANCEL was selected, the phone display will return to idle.
If BEGIN was selected, proceed to Step 7.
7. Dial the number to be stored, up to 31 digits.
8 Press STORE.
If a mistake is made during the process, the Memory LED will turn red.
Dialing a Memory Dial Number
With the phone on-hook, follow the steps below to dial a memory dial number.
1
Push the MEMO button. The screen will display SPDL(01-20).
2 Dial the 2 digit storage location (00 to 20) to be dialed. The number will be
dialed.
Caller ID
The CP4400 provides on-hook caller ID. It will display the name and number of an
incoming call. The CP4400 is NOT compatible with off-hook caller ID, also called
Caller ID on Call Waiting (CIDCW).
Review Incoming Calls
While on-hook, press the VOL- button to review incoming calls.
Review Outgoing Calls
While on-hook, press the VOL+ button to review outgoing (dialed) calls.