JXD S601 - Manual

NOTIFICATION
Thank you for purchasing JXD product!
This menu includes very important security arrangement and information about the product. For be-
tter using and enjoying it, we highly recommend you to read the following information before starting to use it.
We try our best to make the content correct and complete, but it can’t certify that there is no mistakes
and omit of the introduction. Any further information, please refer to the product.
DON’T use your device when in very dry environment to avoid static impacts.
DON’T leave your device near children.
DON’T use your device when driving to avoid traffic accidents.
AVOID leaving your device in high temperature, high humidity or dusty air-environment.
AVOID crushing your device with any hard objects, which may cause its surface scratches or some
hardware damage.
DON’T disassemble your device individually.
MUST insert or pull out the TF card in power-off status to avoid unpredictable damageto your device
caused by transient current.
DON’T disconnect your device from computers while formatting system or download/upload files,
which may cause program errors.
JXD is not responsible for the lost of your data in your device under any circumstances.
JXD will not inform its customers for any modification of software of product introduction in advance,
and JXD’s interpretation shall prevail in the precondition of obeyingthe local laws.
BRIEF INTRODUCTION
S601
1
2
3
4
5
6
7
8
9
10 11 12
S601 Figure
Front View:
1. DIRECTION BUTTON 2.POWER 3.CHARGE 4.MENU 5.HOME 6.CONFIRM
7. BACK 8.ESC 9.START 10.MENU 11.SELECT 12.JOYSTICK
Functions of the Buttons:
1 DIRECTION BUTTON: Move the icons and control the direction in games
2. POWER: Green light while running
3. CHARGE: Red light while charging and the light goes out while full
4.MENU: Wallpaper and Settings
TOP VIEW
13 14 15 16 17 18 19
13.L 14.R 15.TV-OUT(via upgrade) 16.USB 17.EARPHONE 18 .VOL - 19. VOL+
Functions of the Buttons:
13. L: Left button, switch the pages in the main interface
14. R: Right button, switch the pages in the main interface
15. TV-OUT 16. USB: Data transfer and charge 17. Earphone 1 8. VOL- 1 9. VOL+
20 21 22 23
20.TF CARD SLOT 21.POWER ON/OFF 22.LOCK/ON 23.MIC/RESET
20. TF CARD SLOT: The back side up when insert the card. (To avoid data lost, please insert the TF card in
the power-off state)
21. POWER ON/OFF：A. Press the button for 3s to power on; B. In the power-on state, press 3s to po-
wer off and press HOME for 6sc toforce to power off; C. In the power on state,
press the button to lock the screen.
22. LOCK/ON: Control the function buttons: When in ON, you can access to the function buttons; When
in LOCK, the function center is locked.
23. MIC/RESET: MIC and the RESET hole.
Functions of the Buttons:
QUICK START
The Status of the Device and Notice
Notification Icons
When notice appears in the notice board, press the notification bar, and then slide downward with
fingers or Touch Pen to start notice board.
Alarm ON Silent mode USBTESTING NO TF CARD PC and device connecting viaUSB
Music Playing Insufficient TF Space Charging
Power On / Off
Power On
Press the power button for 3s to see the starting picture, 50s' later, system enter into the status of Screen
Lock，please slide to unlock the screen.
Power Off
1. Press the power button for 3s to pop up the power-off options, shut the device by clicking it;
2. Press the power button for 6s to force to shut the device.
The Start and Turning-off of the Screen
The screen will be shut automatically when it is idle
1. After being idle for a while, the Screen will be shut automatically to save power;
2. In the starting state of the screen, press the power button to shut the screen.
Notice: If you can set the time to turn off the screen, you can find the Setting in All Apps and then touch
Screen timeout in the Display
Turn on the screen in the Turning-off state
In the turning-off state, you can start the screen by pressing power button and
the the screen will enter into lock state. Slide the lock icon upward via fingers
or touch pen to unlock the screen, and slide the
Volume button downward to enter into Silent Mode.
Notice
Status Bar
Vol Adjust Back
It will enter into the Main Interface after unlocking it, click the corres ponding icons to enter into the
corresponding applications.
Change the Wallpaper
Main Interface
1. In the main interface, press the Menu button to pop up the menu and then choose the Wallpaper;
2. Click to choose the picture and then click Set wallpaper to confirm.
Change the style of the shortcut in the bottom of the main interface
1. In the main interface, press the Menu button to pop up the menu
and then choose the Settings;
2. Click Icon Style to set the style.
Click the in the main interface, and you can check all the icons by
sliding in the blank up and down.
USB Connect
Storage setting
Before transferring the file, you should set the storage mode;
1. Connect your device with PC via USB and the notifications will
appear in the Notice Bar;
2. In the Notice Panel, click USB connected and then click Turn on
USB storage;
3. Then the USB connected successfully.
Copy the file into the storage:
1. Connect your device with PC via USB;
2. Set the storage mode and connect the device with PC;
3. Open your device in MY COMPUTER to check up the contents of
the Removable Disk (x);
4. Find the file you need and copy it to the "Nand-flash (I Disk)";
5. After backup, click the Safely Remove Hardware to uninstall the
storage.
Notice: When your device is connected with USB, if you turn on USB storage, you can not access
to your memory card through your device but you disconnect it.
QUICK START/MAIN INTERFACE
QUICK START QUICK START/MAIN INTERFACE
5.HOME: Back to the homepage (not suitable for some games)
6.CONFIRM
7.BACK
8.ESC
9.START
10.MENU
11.SELECT: Select button/ Coin button
12.JOYSTICK: Control the direction
Herein is figure of Status Bar：
S601
S601
S601
S601
S601
S601
S601
Bottom View
The Interface of All Apps
DIGITAL PMP
USERS’GUIDE