Jeep 2010 Liberty - Manual (Page 469)

LIGHT BULBS – Exterior Bulb No.
Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 9008 H13
Front Park/Turn Signal Lamp. . . . . . . . . . . . . 3757AK
Front Side Marker Lamp . . . . . . . . . . . . . . . . . . . 168
Back-Up Lamp . . . . . . . . . . . . . . . . . . . . . . . . 3157K
Center High Mounted Stop Lamp
(CHMSL) . . . . . . LED (serviced at an authorized dealer)
Fog Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . H10 9145
License Plate Lamp . . . . . . . . . . . . . . . . . . . . . . . 168
Rear Tail/Stop. . . . . . . . . . . . . . . . . . . . . . . . . 3157K
Rear Turn Signal Lamp . . . . . . . . . . . . . . . . . 3757AK
BULB REPLACEMENT
Headlamp
1. Open the hood.
2. Reach behind the headlamp housing to access the
headlamp bulb lock ring.
3. Firmly grasp the lock ring and rotate it counterclock-
wise to unlock it.
4. Remove the bulb and connector assembly from the
headlamp housing.
5. Disconnect the bulb from the electrical connector and
then connect the replacement bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
6. Install the bulb and connector assembly into the
headlamp housing and rotate the lock ring clockwise to
lock it in place.
7. Close the hood.
468 MAINTAINING YOUR VEHICLE