Jeep 2010 Liberty - Manual (Page 173)

Cleaning the ParkSense
ா
System
Clean the ParkSense ௡ sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.
ParkSense ா System Usage Precautions
NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense ௡ system operat-
ing properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense
௡.
• When you turn ParkSense௡ off, the instrument cluster
will display “PARK ASSIST DISABLED.” Further-
more, once you turn ParkSense
௡ off, it remains off
until you turn it on again, even if you cycle the ignition
key.
• When you move the shift lever to the REVERSE
position and ParkSense ௡ is turned off, the instrument
cluster will display “PARK ASSIST DISABLED” mes-
sage for as long as the vehicle is in REVERSE.
• ParkSense௡, when on, will MUTE the radio when it is
sounding a tone.
• If a ParkSense௡ system malfunction occurs, a single
chime will sound once per ignition cycle. In addition,
the Electronic Vehicle Information Center (EVIC) will
display “SERVICE PARK ASSIST SYSTEM” and the
LED in the ParkSense
௡ switch will illuminate. If this
occurs after making sure the rear fascia/bumper is
clean and clear of snow, ice, mud, dirt, or other
obstruction, see your authorized dealer for service.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE