Jaypro Sports SEYL-824 - Manual (Page 4)

Rev E, 07/09
(8) Attach rear backstay (item 5) to upright using hardware shown in Detail A.
(9) Insert one backstay extension tube (item 4) into each rear backstay. (Note: insert end
with single hole and snap pin, see Detail C).
(10) Lift rear backstay and raise base frame into vertical position. Assemble rear backstay
into base frame by inserting quick release pin. (See Detail C)
(11) Stand goal upright using at least two people.
(12) Pull the net from each end to stretch over top crossbar. Drape net over both
backstays. Secure front edge of net to upright using 9” lengths of velcro net tie.
Secure net to backstay using 9” lengths of velcro net ties. (See Detail F)
(13) Anchor base of net using ground stakes provided. (See Detail G)
STORAGE INSTRUCTIONS
(SEYL-24GCB, Storage Bag provided separately)
(1) Using no less than two people, lower the goal face down onto the ground. Remove
quick release pin (item 9) and lower the base frame onto the upright pipe. Re-insert
the quick release pin (item 9) back into its original position.
(2) Telescope the backstay extension tube (item 4) into the rear backstay (item 5). The
rear backstay will fold onto the base frame.
(3) Disassemble both uprights from the crossbar.
(4) Remove net from the crossbar and disassemble the crossbar.