Jaypro Sports AS-300 - Manual (Page 3)

JAYPRO SPORTS
COMBINATION GAME STANDARDS, AS-300
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 AS301 Upright 2
2 HM225 Pulley Hanger 1
3 AS30B T-Base Assembly 2
4 AS302RP Cable Buckle Assembly 1
5 HS1243 3/8”-16 x 3 ¼” Hex Head 3
6 HN265 3/8”-16 Locknut 3
7 HM771 Guy Cable Assembly 2
8 HB201 5/16”-18 x 4” Eyebolt 4
9 HN263 5/16”-18 Wing nut 4
10 AF737 Pulley Sheave 1
11 HN256 ¼”-20 Locknut 1
12 HS278 ¼”-20 x 1 ¼” Hex Head 1
13 HN261 5/16”-18 Locknut 2
14 HM5054 5/16” Snap Hook 2
15 RP1222 Top Cap 2
16 HS323 3/8”-16 x ½” Square Head Set 4
17 HS5015 5/16”-18 x 2 ¼” Hex Head 4
18 HW2049 5/16” Flat Washer 8
19 RW5003 Wheel 4
20 HN260 5/16”-18 Hex Nut 8
ASSEMBLY INSTRUCTIONS
Tools required: ½” Box Wrench
9/16” Box Wrench (2) or
Adjustable Wrench (2)
Important note: this unit is designed for practice use only. Any attempt to gain
competition net height through excessive cable tension may damage the equipment.
Read all instructions carefully before using this unit.
Set your floor plate as per the installation instructions. Allow the grout to cure for a
minimum of 12 hours before using the floor plates. For the as-300 game standard, the
following floor plate centerline dimensions are appropriate:
Volleyball- 37 ft. Center-to-Center
Badminton- 25 ft. Center-to-Center
Tennis- 44 ft. Center-to-Center
1) Assemble the wheels (19) to the base of each upright using hex head screws
5/16”-18 x 2 ¼” (17), 5/16” flat washers (18), and hex nuts 5/16”-18 (20) as
shown in the illustration.