Jaypro Sports FBSC-240EB - Manual (Page 5)

Rev: A Page 5 of 8
Assemble lower goal frame : Continue
6. Install both lower uprights onto the crossbar assembly.
7. Install and secure hardware, noting the orientation of the carriage bolt heads.
8. If you have the model FBSC-240EB with European backstay – install the lower
backstay hubs at this point.
a. Slide one 7/8” x 5” long backing bar (item 17) into the channel at the
bottom of the upright (item 3). Slide the bar along the channel to about
30” from the top end of the upright.
b. Attach the lower hub (item 16) to the backing bar as shown – leaving the
hardware loose.
c. Properly position the lower hub by inserting the European backstay into
both top and bottom hubs.
d. Tighten the hardware, securing the hub and remove the backstay for now.
e. Repeat process for the other side.
9. Stand the assembled lower goal frame and carefully place it into the footing or
previously installed ground sleeve.