Jaypro Sports PFN-12 - Manual (Page 7)

Rev: - Page 7 of 9
Net:
Lay the net out lengthwise and cut the 3/16” coated aircraft cable to length, extending
each end enough to make up the loop. Make up a loop, as shown in, on both ends of the
cable. Attach a cable to both the top and bottom edges of the net using the cable ties
(Figure 7).
Figure 7
1/4" WIRE ROPE THIMBLE with (2X) 1/4" WIRE ROPE CLIPS
STRIP OFF VINYL COATING ON AIRCRAFT
NET (SIZED PER ORDER)
8" BLACK CABLE TIE (SPACE 12” ON CENTER)
Make up the ends: