Jaypro Sports PFN-12 - Manual (Page 3)

Rev: - Page 3 of 9
TOOLS REQUIRED:
(1) 3/8” Socket Wrench and Box Wrench (1) 7/16” Nut Driver
(1) 9/16” Socket Wrench and Box Wrench (1) Cable Cutters
(1) 15/16” Socket Wrench and Box Wrench
SPECIAL NOTES:
 Max spacing between uprights should not exceed 20 ft.
 The net may be broken up into sections to reduce weight and make handling
more manageable. Net sections typically do not exceed 150 ft.
 Net sections should be joined together at a upright, not between uprights.
 Nets should be removed and stored after the season is over.
 Nets should be removed prior to a major storm or high winds.
Layout:
Clear working area from obstructions. Determine the proper location for the uprights on
the field. The spacing between uprights is determined by the net overall length divided by
the number of spaces between uprights (number of uprights minus 1). Note that the
maximum spacing is 20 feet center to center, do not exceed this dimension. Spacing of
uprights is consistent, unless an obstruction is unmovable.
Figure 1
Example 1: A net system that is 72 ft long will require 5 uprights. The
spacing between uprights will be 18 ft. (72 / (5-1) = 18)
Example 2: A net system that is 160 ft long will require 9 uprights.
The spacing between uprights will be 20 ft. (160 / (9-1) = 20)
Upright spaces = Number of uprights - 1
Intermediate
End Upright
End Upright