Jaypro Sports FNFB-30 User Manual

Page 5

Text mode
Original mode

Rev: -

Page 5 of 8

Figure 4

Install Poles:
Before inserting the poles into the sleeves, check to make sure:

1. The cleat is installed opposite of pulley.
2. Run the hoisting rope thru pulley

a. Cleat both ends of rope (loosely).

It is suggested that the wild end of the hosting rope be passed thru the opening of the
cleat and a figure eight stop knot be tied at the end of the rope. This will avoid the line
from getting out of reach for the operator or worse the line inadvertently coming off the
pulley during a game. The pole slides into the ground sleeve.

1/4"-20 x 8 1/2" HEX HD SCREW
(3X) 1/4" WASHER LOCK

1/4-20 ACORN NUT

1/4"-20 NYLON LOCK NUT

1/4" FLAT WASHER

6" LONG CLEAT

~ BACK SIDE ~

POLE

3/8"-16 HEX HD LOCKNUT
3/8" FLAT WASHER

3/8"-16 x 7-3/8" LONG EYEBOLT

3/8" FLAT WASHER

5/16" x 3 1/8" SNAP HOOK