Jaypro Sports BLDP-227TRG - Manual (Page 3)

REV- 7/14/11 Page 3 of 6
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
(1) 9/16” Socket Wrench and Box Wrench
(1) 3/4” Socket Wrench and Box Wrench
(1) Rubber Mallet
(1) Phillips head screwdriver
• Unpack all parts and check against parts list to ensure that all have been
included.
• Inspect all parts for damage. Report any damages to the trucking
company.
Install Feet and Wheel Casters:
1. Attach three rubber feet (bumpers) on the bottom of each leg as shown in
figure 1.
2. Install two wheel casters & support braces on the backside of two leg
frame as shown in figure 2 - fully thread caster stem on, but tighten only
finger tight.
Note: The flange of each flange nut should be against the frame member.
FIGURE: 1 FIGURE: 2