Intex Floating Surface Skimmer v.2 - Manual (Page 9)

(80PO) FLOATING SURFACE SKIMMER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U 05/23/2012
80PO
S AVE THESE INSTRUCTIONS
Page 9
ASSEMBLY FOR EASY SET ® AND METAL FRAME POOLS
English
SETUP
INSTRUCTIONS
13
WARNING
• Do not operate the filter pump while the pool is occupied or in use.
• Strong suction. Do not remove or obstruct the floating cover opening
while the filter pump is operating!
• Keep hands and hair away from the skimmer and floating cover
opening when the filter pump is operating!
• Turn off or unplug the filter pump before adjusting, cleaning, servicing
or removing the skimmer, basket or floating cover.
• Set up the Filter Pump following the Filter Pump owner's manual. Turn on
or connect the filter pump to an electrical outlet.
If no water is flowing into the pump, make sure that the surface skimmer
is perpendicular to the water surface and below the water surface. Open
the air release valve located on the filter housing top cover. When water
starts to flow out, close the air release valve back.
Never run the pump dry as the motor may overheat and damage the
pump!
IMPORTANT
• Remove the skimmer and the hook assembly from the pool before placing
a pool cover over the pool.
• Store the product and accessories in a dry and safe place indoors.