Intex Floating Surface Skimmer v.2 - Manual (Page 6)

(80PO) FLOATING SURFACE SKIMMER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U 05/23/2012
80PO
S AVE THESE INSTRUCTIONS
Page 6
HOOK ASSEMBLY FOR METAL FRAME POOLS AND SEQUOIA SPIRIT ® POOL SETS
English
HOOK
ASSEMBLY
5
6
4
10
Connect the Skimmer
Hose (10) to the
Skimmer (4)
bottom connector.
Assemble the hook as shown.
Press Press
Insert
Insert
6
9
6
12
7 8
Loosen the Skimmer
Screw (5), attach the
assembled hook and hand
tighten the Screw.
NOTE: Do not over
tighten or use tools
such as pliers.
Slide
5
Place the whole assembled hook unit
over the top of a FRAME Pool Top
Beam near the water inlet connector (lower
hose connection). Adjust the hook by
adjusting the two dove-tail screws, to be tight
on the top beam.
Ensure the
hook is
securely
tightened
over the
pool top
beam.
9 Top Board
12
Top Beam
METAL FRAME POOL
SEQUOIA SPIRIT® POOL SET