Problems starting software programs – Canon FB330P/FB630P User Manual
Page 62
62
Nothing displays when the CD-ROM is placed in the drive
Cause :
CD-ROM will not automatically run the menu program
Solution:
Start the menu program manually (
Installation just doesn’t seem to be working
Solution:
Manually install the software by clicking the [Start] button, selecting
[Run] and typing one of the command lines below into the box. If
your CD-ROM drive is labeled other than [D:], substitute the
appropriate letter, such as [E:] or [F:], in the lines below
To install CanoCraft CS-P: [D:\CANOCRFT\ENGLISH\DISK1\SETUP.EXE]
To install ScanGear Toolbox CS: [D:\TOOLBOX\ENGLISH\DISK1\SETUP.EXE]
To install Ulead Photo Express 2.0 SE: [D:\PHOTOEX\SETUP.EXE]
To install Caere OmniPage Limited Edition: [D:\OPLE\DISK1\SETUP.EXE]
To install Adobe Acrobat Reader:
[D:\ACROREAD\ENGLISH\AR32E301.EXE]
To read the electronic manuals on the CD-ROM, navigate to the
[D:\MANUAL] folder and open the PDF files in the respective
subfolders
Problems Starting Software Programs
[No Scanners detected. Please check if CanoScan FB330P/FB630P is
connected properly.] message displays
Cause 1:
Scanner not detected because the AC adapter is not correctly
plugged into the electrical outlet
Solution: