Philips AZ 6892 - Manual (Page 7)

CD HOLD
1 «
SEARCH
»1
STORE
CD HOLD
When carrying the player with you, you can setthe CD
HOLD switch to position CD HOLD. The CD-buttons
are then inoperative (except for the REMOTE control
buttons). Now, playing a disc is not interrupted when
a button is accidentally touched.
For operating the normal CD-buttons, place the CD
HOLD switch to position CD again.
KM SEARCH MM
1. Press briefly (less than 1 second) during PLAY
or SCAN
MM - go to the next track (title)
You can jump to the next title by pressing MM once.
If you want to skip more than one track, press MM
more than once until the display shows the desired
track number.
KM - go to the previous track (title)
If you want to repeat the running title from the
beginning, press KM once.
If you want to repeat one of the previous titles,
press KM more than once until the display shows
the required track number.
2. Keep pressed (longer than 1 second) for
search during PLAY
Keep the button CUE MM (search forward) or
REVIEW KM (search backward) pressed. The disc
is played partly and at high speed, however, the
sound is still recognizable. Release the button as
soon as you recognize the required passage: the
disc will be played in the normal way from this
passage.
If the button is pressed longer than 10 seconds,
the search speed increases automatically.
3. When programming; press briefly (less than
1 second)
VWien programming - in position STOP with a disc
inserted - you can select the desired track
numbers using KM and MM.
PROGRAMMING TRACK NUMBERS____________
You may select a number of tracks and store these
in the memory in the desired sequence. When
playing, you will only hear the stored titles in the
selected sequence. At most, 20 tracks can be stored
in the memory. You may store each track more than
once.
Manual selecting
• Press PLAY > and after that STOP.
• Select the desired track using the buttons KM and
MM until the display shows the required track number.
• Store this track by pressing STORE.
• Select and store in this way all desired titles.
Storing during SCAN
• Press SCAN to play the first few seconds of each
track.
• Press STORE as soon as you recognize a desired
title.
Storing during PLAY
• During normal PLAY you may store the running title
by pressing STORE.
-After pressing STORE the character ’P’ (PRO­
GRAM) appears, indicating that the track has been
stored.
- Store all desired titles in the required sequence.
You may store each track more than once.
- At most, 20 tracks can be stored in the memory,
Vi/hen the memory is full, the character F (FULL)
appears.
- When pressing STORE longer than 1 second, the
display will show in sequence all stored track
numbers.
-You can simply erase the whole memory by
pressing STOP for a second time: the character 'O'
for CLEAR appears now.
The contents of the memory are also erased:
- if the set shuts down automatically (3 minutes after
STOP);
- if the batteries get exhausted or if the power supply
is interrupted in another way.
How to play the stored selection
To play your selection, the CD-player should be in
position STOP; then press PLAY >: now, the word
MEMORY appears.