Philips AZ 6892 - Manual (Page 6)

PLAY SCAN MODE
PLAYING A DISC SCAN
• Ensure that the CD HOLD switch is in position CD.
• Connect headphones to the socket ¡¡1!.
• Open the disc cover.
• Insert the disc, printed side facing up (fig. 2) and
close the cover.
• Adjust the sound with the VOLUME control and the
DBB bass button.
• Playback will start by pressing PLAY>. As soon as
playback starts, the display shows the track num­
ber 1 and the elapsed playing time of the first title.
When the second title is reached the track number 2
appears, etc.
• For brief intemjptions. press PAUSE
OD . The word
PAUSE appears. To continue playback, press PAU­
SE D] again.
• To stop playback, press STOP. Now the display
shows the total playing time and the number of tracks
present on the disc.
• The CD player also goes to position STOP;
- when the end of the disc is reached;
- by opening the disc cover;
- if the batteries run down or if the power supply is
interrupted in another way.
• in the STOP position, the CD-player automatically
shuts down shortly after the last command, normally
after 30 seconds and if a program is stored after
3 minutes. 10 seconds before shut-down the display
starts flashing.
Remarks
- If the battery voltage is not sufficient any more for
playing a disc, the CD-player will not start.
- If PLAY> is pressed and the CD-player shuts down
after some seconds, the CD-player cannot read the
disc. Possible causes are:
- you inserted the disc the wrong way: the label
should face up (fig. 2);
- the surface of the disc is badiy scratched or
dirty, see ’Maintenance’;
- the lens © (fig. 3) is steamed up because of a
sudden transition from a cold into a wamn
environment; do not clean the lens, but let the
set acclimatize for a while.
The SCAN function can be switched on from the
STOP and PLAY mode.
• Press SCAN; the word SCAN appears. Only the
first few seconds of each track are played.
• The momentyou press PLAY>. the SCAN function
is defeated (the word SCAN disappears) and the disc
is played in the normal way from this track number.
• If you press PW or kM. the SCAN function remains
operative and the beginning of the next MH or
previous Md track is played for a few seconds.
• If the SCAN function is not defeated by pressing
PLAY> or STOP, the CD-player automatically returns
to STOP as soon as the end of the disc is reached.
MODE (SHUFFLE and REPEAT)_______________
By pressing the MODE button several times, aii play
modes vwll succesively appear on the display:
1 X REPEAT 1 to repeat the the actual title continu­
ously;
2 X REPEAT ALL to repeat the disc continuously;
3 X SHUFFLE to play the disc in a random order;
4
X SHUFFLE REPEAT to repeat the disc continuous­
ly in a random order;
5 X NORMAL (no display indication) to defeat the
SHUFFLE and REPEAT modes.
In the MEMORY REPEAT ALL mode (if the word
MEMORY is also visible on the display) only the titles
stored in the memory will be played.
The mode MEMORY SHUFFLE is not possible. The
word MEMORY will disappear when the next title is
reached.
To defeat the REPEAT and SHUFFLE mode, choose
position NORMAL (no display indication).