CBC CTR-030NC-2 - Manual (Page 26)

• While the alarm is in process, the buzzer will ring. If you want
to stop buzzer, press any button.
• When selected “ON” and the alarm input is triggered, the unit
will go to alarm record mode from either STOP, POWER OFF
or RECORD modes.
• When selected “OFF” and the alarm input is triggered, the unit
will go to alarm record mode only from the RECORD mode
(including Timer Record). If the unit is in STOP or POWER
OFF mode, it will ignore the alarm input command.
24
RECORDING
ALARM RECORDING (cont’d)
7 Press MENU when finished. Press MENU repeatedly to exit
menu screen.
NOTES:
• When you select ALARM REC MODE ON (L6H, L18H, L30H), the
ALARM indicator will light in VCR indicator panel.
• You can not stop during ALARM REC MODE.
• ALARM indicator in VCR indicator panel blinks when alarm
recording is proceeding.
For example: When the Alarm REC MODE is set to L6H
5 Press DOWN to choose the BUZZER item. Press ENTER
repeatedly to switch buzzer function during alarm recording.
6 Press DOWN to choose the ALARM READY item. Press
ENTER repeatedly to switch alarm ready function.
ALARM SET UP
ALARM SET UP
REC MODE L6H
DURATION 1 MIN
BUZZER ON
ALARM READY ON
ALARM RECALL
(UP) (DOWN) (ENTER) (MENU)
ALARM SET UP
REC MODE L6H
DURATION 1 MIN
BUZZER ON
ALARM READY ON
ALARM RECALL
(UP) (DOWN) (ENTER) (MENU)
Record
(L18H - L30H mode)
Record
(L6H mode)
Record
(L18H - L30H mode)
Record
(L6H mode)
Time Lapse
Record
Alarm
Record
Time Lapse
Record
Alarm
Record
Record Start Alarm signal
is input
Alarm signal
is input
Alarm record
duration ends or
alarm reset
signal is input