Philips AZ 1102 - Manual (Page 7)

CD PLAYER
CD DISPLAY INDICATION
• Total track number: in stop position.
■ Current track number: during CD play.
• II and current track number: in PAUSE mode.
■ SHUFFLE/REPEAT mode: the respective mode is activated.
■ PROG; program function is active or when you store a track.
■ No display: error in CD operation or with the CD
(see Troubleshooting).
SHUFFLE
REPEAT 1
AaPROG
PROG
o o
HI u u
PLAYING A CD
1. Set the source selector® to CD.
2 To open the CD compartment, lift the CD door on the edge
(marked LIFT TD OPEN®).
3. Insert the audio CD, printed side facing up.
4. To close the CD compartment, push the door down.
- The CD player scans the contents of the CD and the total number of
tracks is displayed
5. Press PLAY»PAUSE ► II® to start playback.
6. Adjust the sound using the VOLUME control ® and the DBB switch @.
7. To interrupt playback, press PLAY»PAUSEMl®.
Press PLAY• PAUSE Ml ® again to continue playback.
8
.
Press STOP M ® to stop CD playback.
9. Set the source selector @ to TAPE/OFF position to switch off the set.
(Vote; CD playback will also stop when:
-the CD has reached the end;
-the CD door is opened;
-the source selector is in the TUNER or TAPE/OFF position.
SEARCH FM or^M
Selecting a different track during playback
- You can jump to the next track by pressing SEARCH ® once. If
you want to skip more than one track, press SEARCH ® more
than once until the display shows the desired track number.
- If you want to repeat the running track from the beginning, press
1 « SEARCH ® once. If you want to repeat one of the previous
tracks, press SEARCH ® more than once until the display shows
the desired track number.
Starting with a particular track
1. In the STOP position you can select a desired track using the
FM SEARCH or SEARCH button ®.
2. Press PLAY• PAUSE ► !! ® to start playback.