Corega WLUSB2GO User Manual

Page 23

WLUSB2GO Manual

• Wireless mode: Select wireless network mode(speed)

- 802.11b/g mixed: Automatically detect 11b or 11g

- 802.11b only: Frequency only 11b

- 802.11g only: Frequency only 11g

• 11b/g Protection: In order to keep the connection stable,

please select [Auto] to automatically conﬁrm which mode
the wireless network is in.

• TX Rate: Manually force the Transmit using selected rate.

Please accept the default setting.

• Tx-Burst: Ralink’s proprietary frame burst mode. When it is

checked, transmit throughput will be improved.(Only work
when AP support this function. eg: coreag WLBARGMO)

- Enable TCP Window Size: Extend the Window size of

TCP.(When checked, the recieve speed will improve.)

- Fast Roaming at ___ dBm: It will enter romaing mode when

dBm reaches a level.

• CCX2.0: Open CCX(supports Cisco Compatible Extensions

function). Check it when AP supports Cisco.

- LEAP turn on CCKM: Open CCKM fuction (Cisco Key Man-

agement).

- Enable Radio Measurements:Open the function of CCK

Monitor AP Channel.

- Non-Serving Channel Measurements... : Select and start to

monitor if wireless channel is non-serving.

• Radio Off: Disable wireless radio wave.

• [Apply] : Click this when ﬁnish the settings.