Wpa and wpa2 – Corega WLUSB2GO User Manual
Page 16
15
WLUSB2GO Manual
15
a. Authentication Type: Select [WPA-PSK] or [WPA2-PSK] (AP
must support the function).
b. Encryption: Select [TKIP] or [AES].(Same as AP)
c. Enter the selected AP’s password in [WAP Preshared Key]
box and click [OK].
《WPA and WPA2》
1. Select an AP with [WPA] or [WPA2] authentication and press
[Connect]. Here we use corega A02 for example, hence the fol-
lowing settings must correspond with corega A02.
2. Setting the [Authentication and Security] Page: