Corega WLUSB2GO - Manual (Page 14)

13 13
WLUSB2GO Manual
13
2. Please follow the instructions:
a. [Authentication Type]: indicates the authentication type of
the AP/Router. Please confirm the setting of the AP/Router.
＊[Open]: WEP open system is based on request and grant. It is
essentially no authentication.
＊[Shared]: WEP shared key is based on request, challenge, challenge
response, grant/deny.
b. Select [WEP] in [Encryption].
c. Enter AP encryption keys(64/128bits) in the box Key1~Key4.
Please accept the auto selected setting of [Hex]/[ASCII].
d. Select the current AP encryption keys from Key1~Key4.
e. Press [OK] to finish setting.