Philips AE 3805 - Manual (Page 7)

English
WHICH BUTTONS ARE WHERE ?
Display - radio and clock display
STORE/TIME SET - to store a preferred transmitter
and to set the clock and the alarm
SLEEP - to switch the slumber function on/off
DISPLAY - to select the display function
TIMER - to switch the alarm on/off
BAND - to select the wave range
TUNE ^ - lights when a station is found
ON/OFF - to switch the radio on/off
RADIO/BUZZ-alarm with radio orwith buzzer + radio
VOL. - to adjust the volume
- to locate the required station and to adjust the
time
PRESET - for 20 preferred transmitters
0 - earphone socket
6V DC - socket for the mains adapter
The type plate Is on the rear of the radio.
This set complies with the radio interference require­
ments of the European Community.
SUPPLY
Batteries
• Open the battery compartment and insert as in­
dicated four (preferably alkaline) batteries, type R6,
UM3 or AA.
• Replace the batteries on time to avoid erasure of the
preset stations. Turn off the radio and replace the
batteries within 3 minutes.
• Remove the batteries if exhausted or if they will not
be used again for a long period.
Mains adapter
• Connect a mains adapter to the 6 V DC socket. The
adapter must supply 6 V DC ffi-e-©, minuspole © to
the centre pin of the socket
DISPLAY
When the radio is switched off (OFF), the display
shows the time (AM or PM).
• Press DISPLAY to see the alarm time ®
• Press DISPLAY again to switch back to time. The
display also switches back to time automatically after
5 seconds.
When the radio is switched on (ON), the display shows
the tuned frequency with the selected wave range.
• Press DISPLAY to switch to alarm time @L The
display automatically switches back to frequency
after 5 seconds.
• Press DISPLAY again to switch from alarm time to
time.
• Press DiSPLAY once more to return to frequency.