Philips 14GX8510 - Manual (Page 8)

INSTALLATION
HOW TO START MANUAL INSTALLATION
Step 1 • Press button to start installation menu
and press CD button again to highlight
MANUAL menu.
Step 2 • Press MENU button to start MANUAL mode.
Step 3 • Press MENU — button to select either UHF 1, VHP 1
or VHP 3 band.
Step 4 • Press MENU + button to start MANUAL installation.
Step 5 • Enter your preference number for that available
channel once a blinking channel number appears.
:>0
Step 6 • Press Ci) button to store channel number.
Step 7 • Repeat Step 3 to Step 5 to install other channels.
PD
Step 8 • Press □□ button to exit from menu.
I AUTO MAHIIOL I
IFINE SWAP .SKIP I
I^^AUTO^^^ANUAU^^^I
I manual '^ 1 h>l
IVHF1 I . I..... I
I MANUAL 1 K>l
I ■ UHF “I”......................... 1
---- ■
I MANUAL 1 l±>t
I VHF1 I--............................... [
I MANUAL 1 F>l
I VHF3 I-"............................... I
I MANUAL — b>l
IVHF .................... 1 ............. I
I MANUAL*-------------
IVHF i l~~ |....J.-r—I
I MANUAL* 5 PI
I STORED I
HOW TO DO FINE TUNING
To achieve optimum picture and sound quality, you can use the
FINE TUNING feature to adjust the picture and sound quality.
Step 1 • Select the channel which you want to fine tune.
PD
Step 2 • Press CD button to start installation menu.
PD
and press qd button until FINE is highlighted.
Step 3 • Press MENU button to start FINE mode.
Step 4 • Press and hold MENU + or — button until the
desired picture and sound is obtained. A blinking
channel number will then appear on the screen.
PD
Step 5 • Press CD button to store new setting.
Repeat all the above steps if you wish to do a
fine tuning for other channels.
PD
Step 6 • Press qd button to exit from menu.
I AUTO MANUAL I
IFINE SWAP SKIPI
I AUTO MANUAL I
Ifc) FINE
ItnRF'f r
T-gi
r
TORFi r
KR FINE~I»F
c
~T~lg 1