Enabling and disabling web setup – Casio YW2L User Manual
Page 22
22
To change the Web Setup login password
1
On the initial Web Setup page, click the [Change Password] button.
z This will display the change password page.
2
In the “Current Password” box, enter the current password (“casio” if you have
not yet changed the initial default password) and then enter the new password
into the “New Password” box.
z A password must have at least four single-byte characters and it can be up to 16
characters long.
3
Input the new password again into the lower “New Password” box.
4
Click the [Change] button.
z If you input all of the required information correctly, your password will be changed and
the Web Setup top page will reappear.
Enabling and Disabling Web Setup
This section explains how you can disable the Web Setup page so it is not displayed. You
can disable the Web Setup page when you want to restrict access to Web Setup while
there are multiple computers connected to the Data Projector.
To enable and disable Web Setup
1
While Wireless is shown in the projection area, press the [MENU] key on the
Data Projector’s remote controller.
z This will display the setup menu.
2
Press the [
T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3
Press the [
T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the Wireless setup menu.
4
Press the [
T] key to move the highlighting to “Web Setup”.
5
Use [
X] and [W] to select “Enable” or “Disable”.
z Selecting “Disable” will make it impossible to access the Web Setup page from any
computer.
6
To exit the Wireless setup menu, press the [ESC] key.