Philips AZ 7566 - Manual (Page 7)

POWER SUPPLY
Mains adapter
1 Make sure that the local voltage corresponds
to the voltage of the adapter (see
accessories).
2 Connect the mains adapter to the player's
4.5 V DC socket and to the wall outlet.
• Always disconnect the adapter when you are
not using it.
Batteries, type LR6, UM3 or AA (supplied or optional available)
Open the battery compartment and insert 2
alkaline batteries.
Typical playing times under nonmal conditions:
Alkaline batteries: 5.5 hours (ESA off)
4.5 hours (ESA on)
Remove the batteries if they are empty or
if the CD player is not to he used for a
long time.
Note: In the right-hand comer of the display the battery condition will be indicated:
-Full batteries: no indication.
-Weak batteries: (s -symbol lights up. This symbol is not available when
rechargeable batteries are used.
-Dead batteries: -symbol flashes and the message bRtt appears. Replace
the batteries or connect the power adapter.
Batteries contain chemical substances, therefore they should be disposed of
properly.