Philips AZ 7566 - Manual (Page 14)

OPERATION
ESA - Electronic Shock Absorption Memory
• Activate the ESA memory by siiding the
ESA switch to the right.
-► The ESA symbol lights up in the display.
-► The ESA memory continuously stores in advance the
CD data to be played. This is to prevent sound skipping
during play due to shock and vibration.
-► Prolonged shocks and vibrations may empty the ESA
memory completely. Then the display shows SDirS'
and there will be no sound.
j
Note: When switching the ESA feature on and off, CD play will be delayed or
interrupted for a short time.
RESUME/HOLD
RESUME - playing from where you have stopped
Activate the RESUME feature by sliding the RESUME/HOLD
switch to the middle.
If you stop CO play by pressing the STOP ■ button, the last
played position will be stored.
Press Ml to resume CO play from the position where it
was stopped.
HOLD - deactivating all buttons
Activate the HOLD feature by siiding the RESUME/HOLD switch to the far right.
-► Now all buttons are deactivated and will not function until you switch the
feature off again. If you press a button (except OPEN), the display will indicate
HOLD.
Notes:
-In the hold position, the resume function is automatically activated.
-Do not open the lid as this erases the information about the last position piayed.
14