Prog p - programming of tracks (max. 25 tracks), Operation, Btlecb – Philips AZ 7566 User Manual

Page 13: Cl i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

PROG P - programming of tracks (max. 25 tracks)

1 Select the desired track with PREV r« or NEXT »w.

2 As soon as the desired track is displayed, press the PROG button to store the track

in the memory.

Display indication of: track number

IP ! total number of stored tracks, e.g.

PD3

Notes:

- When you try to store more than 25 tracks,

the display indicates PUL L.

- When you press PROG and there is no track selected.

Cl I, ,

run

ГГ

btLECb

Playing the program:

• If you have selected the tracks in STOP mode, press the PLAY/PAUSE ►!! button.

• If you have selected the tracks during CD play, first press STOP ■ and then the

PLAY/PAUSE ►!! button.

-► Display indication; PROGRAM.

Your program will be played in the selected playing mode (e.g. shuffle).

Reviewing the settings:

• Press the PROG button for more than 2 seconds.

-► Display indication: each stored track successively flashes for a short moment.

Erasing the program in STOP mode:

• Press the STOP ■ button to erase the program.

-► PROGRAM disappears on the display and your program is erased.

->- CLERP lights up briefly on the display.

Note: Interrupting the power supply or opening the lid will also erase the program.