beautypg.com

Connections, Recharging the philips battery pack on board, Connecting the headphones – Philips AZ 7181/00 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CONNECTIONS

Recharging the Philips battery pack on board

(supplied or optionally available) _____________________

AY 3361 NiCd battery pack for recharging on board

The battery pack (NiCad) will be recharged if the mains adapter is connected.

Approx, charging time: 14 hours (NiCd)

Note: - Use only the Philips battery pack, as other rechargeable batteries cannot be

recharged on board.

- Disconnect the mains adapter or remove the battery pack after recharging it.

Connecting the headphones

(supplied)

Connect the supplied headphones with the

ii LINE OUT jack.

Note: Use this jack also for connecting your HiPi system

(signal lead) or your car radio (adapter cassette or

signal lead). In both cases, the volume of the CD

player has to be set to position 8.

Use your head when using headphones

Hearing safety:

Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Traffic safety:

Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.