Switching off alarm, Switching off the aurm – Philips AJ3953 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SWITCHING OFF ALARM
Notes:
• The HI volume is always greater or equal to the L o
volume: e.g.i. L a ' /5, H I: /5'
e.g.ii. L o ' /o', W !c‘
• The starting volume is i o 'OD. with a possible low
volume range uCi - 3c, and the maximum volume is
¡3 !:3c', with a possible high volume range
/ ~ ~1 ^
• The gentle wake volume settings do not affect
normal CD and radio playback volume level,
• It is not possible to review the gentle wake volume
range during the active alarm call as pressing
ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF
cancels the alarm completely.
• During the alarm call, if you press ior^the high
volume stops increasing immediately.
Selecting Buzzer or Radio Alarm
• Press ALARM 1 MODE/ OFF or AURM 2 MODE/
OFF repeatedly until the (buzzer) il FH or
(radiol b u display is shown.
Note:
If you have selected the radio alarm t u, make sure
you have tuned properly to a station.
CD Alarm Mode; Selecting a CD track
You can program and select a CD track number between
1-99, when the set Is in the standby or radio playback
mode.
However, if the track number programmed does not
exist on your CD, the CD will start playback from the
first track during the alarm call.
1 Insert a CO into the CD compartment.
2 Press AURM 1 MODE/ OFF or
AURM 2 MODE/ OFF repeatedly until the CD and
track number display is shown.
See figure [^.
3 As soon as the CD alarm display appears,
press lor? until the desired track number is shown.
The display returns to standby clock time,
/ To review your programmed track number, press
AURM 1 MODE/ OFF or ALARM 2 MODE/ OFF
again repeatedly until the CD alarm display is shown.
Note:
• The buzzer alarm option will automatically replace
the CD alarm if you have:
- inserted a CD incorrectly:
- Inserted a damaged CD;
- forgotten to Insert any CD;
- not closed the CD door properly.
SWITCHING OFF THE AURM
There are three ways of switching off the alarm. Unless
you cancel the alarm completely, the 24 HOUR AURM
RESET will be automatically selected after 59 minutes,
from the time your alarm time first goes off.
24 HOUR ALARM RESET
It you want the alarm mode to be stopped immediately
but also wish to retain the same alarm setting for the
following day:
• Press from 3 possible options according to your
selected alarm:
a 24 HR RESET to switch off the buzzer, radio or
CD alarms
b STOP ■ CD alarm only
c ON/ OFF radio alarm only.
- You will hear a beep tone confirming 24 hour reset
activation.
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or during
the alarm call:
• Press AURM 1 MODE/ OFF or ALARM 2 MODE/
OFF once or more until the selected alarm indicator
disappears from the display.
If you cancel the alarm during the alarm call, you
will also hear a beep tone confirming the alarm
has been cancelled.
REPEAT ALARM
This will repeat your alarm call at 9-minute intervals.
• During the alarm call,
press REPEAT ALARM/
brightness
control
.
• Repeat if desired up to an hour.
Notes:
• The selected alarm mode G, •0, or 0 indicators will