CFM Corporation 2467 - Manual (Page 13)

13
Dutchwest Natural Vent Gas Heater
30002008
Operation
Your First Fire
Read these instructions carefully and familiarize
yourself with the burner controls. Locate the pilot
assembly, Figure 25. Follow the lighting instructions on
Page 14 exactly.
During the first fire, it is not unusual to smell some
odor associated with new logs, paint and metal being
heated. Odors should dissipate within an hour or so,
however, you can open a window to provide fresh air
to alleviate the condition.
Pilot and Burner Inspection
Each time you light your heater check that the pilot
flame and burner flame patterns are as shown in
Figures 26 and 27. If flame patterns are incorrect, turn
the heater off. Contact your dealer or a qualified gas
technician for assistance. Do not operate the heater
until the pilot flame is correct.
Follow regular maintenance procedures as described
on Page 19.
Fig. 25 Pilot Assembly location.
ST769
Pilot
Assembly
LG143
Fig. 27 Correct burner flame pattern.
Red Glow
CO105c
Fig. 26 Correct pilot flame pattern.