ISP Technologies VECTOR 210 - Manual (Page 3)

IMPORTANT SAFTEY INSTRUCTIONS
Please read the following very carefully before operating this unit
• READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING THIS UNIT. Keep these instructions
for future reference. Heed all warnings and follow all instructions.
• Do not use this unit near water, in the rain, or where there is moisture. If this warning is
ignored a serious electrical shock or death may occur.
• Do not attempt to service this unit. No user serviceable parts inside. Refer servicing to
qualified, ISP approved personnel. Servicing is required when the unit is damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been
dropped.
• Do not block any ventilation openings on the unit. Do not install near heat sources such as
radiators, heat registers, stoves, or other apparatus that produces heat.
• Do not defeat the grounding pin on the power plug. A grounding type plug has two blades and
a third grounding prong. If the grounded plug does not fit in your outlet, please consult an
electrician for replacement of the outlet, which may be obsolete.
• Care should be taken to avoid getting any foreign objects or liquid into this unit. Avoid exposure
of this equipment to dripping or splashing and ensure that no objects filled with liquid, such as
vases, are placed on the equipment.
• Only use accessories or attachments that are specified by the manufacturer.
• Use only with the caster attachment, stand, connecting bracket, or table specified by the
manufacturer, or sold as an accessory with the unit. When a caster attachment is used, use
caution when moving the cart/apparatus combination to avoid injury from tipping over.
• To completely disconnect this unit from the AC mains, disconnect the power supply cord plug
from the AC receptacle.
• This active speaker system has internal power amplifier(s) and a heatsink located internally with
cooling ports on the back of the unit for airflow over the heatsink. Care should be taken to avoid
placing this active speaker in a location where the airflow is impeded.
• Do not drive the unit into excessive heavy distortion for an extended period of time to avoid
premature speaker failure.
• Failure to follow these instructions may void the warranty.
THIS UNIT CONTAINS POTENTALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK
OR HAZED, DO NOT REMOVE THE POWER AMPLIFIER MODULE, INPUT PANEL OR AC
INPUT PANEL. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED ISP TECHNOLOGIES SERVICE PERSONNEL.