Interlogix 1035 Series - Manual (Page 2)

1035 Series Miniature Surface Mount Self-Adhesive
Magnetic Contacts
Installation Instructions
1035, 1035W, 1037W
Determine the positions of contact and magnet. Clean surface with alcohol before
attaching contact and magnet (this will improve the adhesion of the urethane foam to
the surface). Remove protective backing from foam strip, press contact and magnet
firmly to surface.
PK-0989 Rev F 10/01
ULC Specifications
All Contacts: 30 V DC, 50 ma max. Gap Specifications:*
See UL Gap Specifications
* Gap Specifications are nominal and may vary ± 20%. Gap Specifications are for switch to make. Break
distace is approximately 1.1 to 1.5 times make.
Magnet
Part No. 1927
(included)
0.25"
0.64 cm
0.375"
0.95cm
R
R
1.50"
3.81cm
** FORM A (1035, 1035W)
Voltage: 100 VAC/DC Max
Current: 0.5 A Max
Power: 7.5 W Max FORM C (1037W)
Voltage: 30 V Max
Current: 0.25 A Max
Power: 3.0 W Max
Part Loop Electrical Gap Distance*
Number Type Configuration
1035 Closed N/O 5/8"
1035W Closed N/O 1"
1037W Open or Closed SPDT 1"
UL Specifications
** European Union Specifications: 48 VAC/DC Max., 0.5 Amp