Interlogix 1285T Series - Manual (Page 2)

Part Loop Electrical Gap Distance*
Number Type Configuration
1283T Open N/C Up to 1"
1283TW Open N/C Up to 2"
1284T Open or Closed SPDT Up to 1"
1284TW Open or Closed SPDT Up to 2"
1285T Closed N/O Up to 3/4"
1285TW Closed N/O Up to 1 1/2"
1286TW Open N/C Up to 1 1/2"
1285T Series Magnetic Contacts
Designer-Styled Surface Mount with Screw Terminals
Installation Instructions
1283T, 1284T, 1285T, 1283TW, 1284TW, 1285TW, 1286TW
Select desired mounting positions for contact and magnet. Important: Align contact
and magnet as directed on magnet base (switches are polarity sensitive). Attach
contact and magnet to surface. Wire leads to terminals. Snap on cover.
** FORM A (1285T, 1285TW)
Voltage: 100 VAC/DC Max
Current: 0.5 A Max
Power: 7.5 W Max
PK-0982 Rev D 11/01
FORM B (1283T, 1283TW,
1826TW)
Voltage: 30 V Max
Current: 0.25 A Max
Power: 3.0 W Max FORM C (1284T, 1284T)
Voltage: 30 V Max
Current: 0.25 A Max
Power: 3.0 W Max
ULC Specifications
All Contacts: 30 VDC, 50 ma max. Gap Specifications:*
See UL Gap Specifications
UL Specifications
**European Union Specifications: 48 VAC/DC Max., 0.5 Amp
* Gap Specifications are nominal and may vary ± 20%. Gap Specifications are for switch to
make. Break distance is approximately 1.1 to 1.5 times make.