1125 series, Ul specifications, C-ul specifications – Interlogix 1125 Series User Manual
Page 2: Installation instructions, Diameter stubby press fit with wire leads, Ge interlogix
UL Specifications
Part
Loop
Electrical
Gap Distance
Magnet
Number
Type
Configuration
(Up To)
*
Length
1125
Closed
N.O.
1
/
4
"
3
/
4
"
1125W
Closed
N.O.
3
/
4
"
3
/
4
"
*
Gap Specifications are nominal and may vary
±
20%. Gap Specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
**
FORM A (1125, 1125W)
Voltage: 100 V AC/DC max
Current: 0.5 A max
Power: 7.5 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
C-UL Specifications
All Contacts: 30 VDC, 50 mA max
Gap Specifications:
*
See UL Gap Specifications
1125 Series
3
/
8
" Diameter Stubby Press Fit with Wire Leads
Installation Instructions
Drill Mounting in Wood
Drill
3
/
8
" diameter holes
3
/
4
" deep for both the contact and the magnet. Press them
into their respective holes.
Mounting in Aluminum Sliding Windows and Doors
Do not overdrill. Attach contact and magnet with RTV mounting compound or epoxy.
PK-0984 Rev G 07/02
.75"
1.90 cm
Magnet
Part No. 1946
(included)
.44"
1.11cm
.75"
1.90 cm
www.GE-InterlogixSecurity.com
2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5485
Technical Service: 800-777-2624
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
GE Interlogix
Made in Taiwan