Interlogix 1078 Series - Manual (Page 2)

1078 Series
1 " Diameter Steel Door with Wire Leads
Installation Instructions
1. Drill appropriate diameter and depth holes for contact and magnet for contact
(1" x 1 1 / 8 " for contact and 1" x 1 1 / 2 " for magnet).
2. Connect contact leads to security system loop and test for continuity.
3. Lightly coat the contact and magnet with RTV mounting compound (part number 1905)
and insert into respective holes.
1040683 Rev A 01/03
www.GE-Interlogix.com 2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5484
Technical Service: 800-777-2624 12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
GE Interlogix
Made in Taiwan
UL Specifications
Part Loop Electrical Gap Distance
Number Type Configuration In Steel In Wood
1076 Open or Closed SPDT Up to 1 / 2 " 1"
1076W Open or Closed SPDT Up to 1" 2"
1076D Open or Closed DPDT Up to 3 / 8 " 3 / 4 "
(no Canadian listing)
1078 Closed N/O Up to 1 / 2 " 1"
1078W Closed N/O Up to 1" 2"
** FORM A (1078, 1078W) FORM C (1076, 1076W)
Voltage: 100V AC/DC max Voltage: 30V AC/DC max
Current: 0.5A max Current: 0.25A max
Power: 7.5W max Power: 3.0W max
* Gap specifications are nominal and may vary ± 20%. Gap specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
** European Union Specifications: 48V AC/DC max., 0.5 Amp
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
C-UL Specifications
All Contacts: 30V DC, 50 mA max Gap Specifications: *
See UL Gap Specifications
Magnet
Part No. 1921
(included)
1.20"
30.5mm
1.51"
38.4mm
1.12"
28.4mm
.95"
24.1mm
.38"
9.7mm
.63"
16mm
.05"
1.3mm
.5"
12.7mm
.99"
25.1mm
.63"
16mm