Interlogix NVR 50 Quick Start - Manual (Page 3)

TVN 50 Quick Start Guide 1 : EN
EN
TruVision NVR 50
Quick Start Guide
Figure 1: Back panel connections
1. Connect to one CCTV monitors (BNC-type
connectors): Main monitor
2. Connect one audio input to RCA connectors.
3. Connect to a RS-232 device.
4. Connect to a network.
5. Connect to an optional eSATA device such as
SATA HDD, CD/DVD-RM.
6. Connect to a power cord.
7. Connect to speakers for audio output.
8. Connect to a VGA monitor.
9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
10. Connect to an optional USB device such as a
mouse, CD/DVD burner or HDD.
11. Terminate the line to the dome cameras using
this RS-485 switch. Default is Off.
12. Connect to a PTZ control.
13. Connect to a keyboard (KTD-405 shown)
14. Connect up to 16 alarm input cables to relay
outputs.
15. Connect up to four alarm relay outputs.
16. Connect to ground.