Interlogix TruVision IP Open Standards Box Quick Start - Manual (Page 8)

EN 6 Quick Start Guide
2. Camera.
3. C-mount adaptor (for C-mount lenses only).
4. Lens (auto iris lens shown. A manual iris has no cable.)Not
included.
5. Auto iris lens cable. Not included.
6. Auto iris lens connector.
Video-type auto iris lens connection:
A. Power; B. NC (no connection); C. GND; D. Video
DC-type auto iris lens connection:
A. Damping coil (-); B. Damping coil (+);
C. Driving coil (+); D. Driving coil (-)
7. SDHC card slot.
Setting up the camera
Note: If the light source where the camera is installed experiences
rapid, wide variations in lighting, the camera may not operate as
intended.
For detailed instructions, please refer to the user manual.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2. Connect the required cables to the camera.
3. Mount the camera to the ceiling using the appropriate fasteners.
4. Set up the camera’s network and streaming parameters so that the
camera can be controlled over the network.
5. Program the camera to suit its location.