Interlogix TruVision Intelligent IP Dome Installation Manual - Manual (Page 16)

12 Installation Guide
Cable requirements
For proper operation, adhere to the following cable and power
requirements for the cameras. Category 5 cabling or better is
recommended. All network cabling must be installed according
to applicable codes and regulations.
Table 1 below lists the requirements for the cables that
connect to the camera.
Table 1: Recommended power cable requirements
Box camera 12 VDC/24 VAC power wires or PoE
(802.3af)
VF bullet camera:
VF mini dome: 12 VDC power jack or PoE (802.3af)
12 VDC power jack or PoE (802.3af)
VF outdoor dome: 24 VAC power wires or PoE (802.3af)