Interlogix TVW-2101 User Manual - Manual (Page 10)

10 TruVision Analog Wedge Camera
Select one of the four mode options: Smart, Auto, B/W, and Color.
In Smart mode, you can select Set as ON or OFF. You can set IR LED working
mode as ON or OFF. When Off is selected, the camera switches to B/W night
mode. Then move the cursor down to select the Level from 1 to 5 to avoid over-
exposure or to increase brightness.
In Auto mode, the IR LED is turned on automatically when the camera switches
to B/W night mode. The picture brightness is not adjustable.
Video Setup
Move the cursor to Video Setup and press OK to enter the video configuration
menu, as shown below.
Brightness: Move the joystick left or right to adjust the brightness of the image.
Contrast: Move the joystick to left or right to adjust the contrast.
Color gain: Move the joystick to left or right to adjust the color gain.
Sharpness: Move the joystick to left or right to adjust the sharpness.
NR: Move the joystick to left or right to set the NR to high, middle, default, or low.
Mirror: Move the joystick to left or right to set the mirror to default, HV, V, or H.