Terminal setup – Interlogix NS3550-2T-8S Installation Guide User Manual
Page 9
![background image](/manuals/679213/9/background.png)
IFS NS3552-8P-2S and NS3550-2T-8S Quick Installation Guide 5
4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ-45 type serial (console) port of the Managed
Industrial Switch. The console port of the Managed Industrial Switch is
DCE already, so that you can connect the console port directly through PC
without the need of Null Modem.
A terminal program is required to make the software connection to the IFS
Managed Industrial Switch. Windows' Hyper Terminal program may be a
good choice. The Hyper Terminal can be accessed from the Start menu.
1. Click
START, then Programs, Accessories and then Hyper
Terminal.
This manual is related to the following products: