Interlogix NS4702-24P-4S-4X Quick Start - Manual (Page 8)

- 8 -
Figure 5-1:
IP Information Screen
 Configuring IP Address
3. At the “#” prompt, enter the following command and press as shown in Figure 5-2.
NS4702‐24P‐4S‐4X# configure terminal
NS4702‐24P‐4S‐4X(config)# interface vlan 1
NS4702‐24P‐4S‐4X(config‐if‐vlan)# ip address 192.168.1.100 255.255.255.
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 5-2:
Configuring IP Address Screen
4. Repeat step 1 to check if the IP address is changed.
 Store current switch configuration
5. At the “#” prompt, enter the following command and press .
# copy running-config startup-config