Interlogix NS3550-24T/4S - Manual (Page 7)

7
Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the terminal will display the initial tests
performed.
Then, the following message asks the login username and password. The factory default username and password are given as
the following and the login screen in Figure 1 appears upon entry of these values.
Username: admin
Password: admin
Figure 1: NS3550-24T/4S Managed Switch Console Login Screen
1. For security reasons, please change and memorize the new password after the first
setup.
2. Only lowercase letters are accepted in the console interface.
Configure IP Address
The Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the following procedures:
 Show the current IP address
1. On “Switch/>” prompt, enter “show ip”.
2. The screen displays the current IP address, Subnet Mask and Gateway. As shown in Figure 2.