Cambridge Audio 510D - Manual (Page 11)

12
Use the Digital cable
Audio Source Connection - Digital
To other sound cards with minijack digital output
Use the Digital cable
❒ Digital Out miniplug only.
❒ Channel output is dependant on the sound card.
To a digital output that is not a minijack:
Use an adapter (not provided) to convert the program source's digital output to a 3.5 mm
minijack, then connect to Digital In. The most common output type would be an RCA
jack. Use a mono RCA plug to mono minijack adapter.
To Sound Blaster Audigy/Live! 5.1 series sound card
❒ Digital Out miniplug only.
❒ 5.1-channel output is produced.
❒ Be sure the “Digital Output Only” option is selected in the
sound card's control software.
A second audio program source can be mixed with the
main program (analog or digital) when connected to AUX. For a source
with a 3.5mm stereo minijack output (like a headphone or line out jack
on an MP3 or CD player), use a 2-meter signal cable with a 3.5mm
stereo miniplug at each end. Other sources may need a cable with a
3.5mm stereo miniplug and two RCA plugs or a 3.5mm stereo miniplug
and a 3.5mm stereo minijack.