Interlogix D7400 Series - Manual (Page 5)

INSTALLATION INSTRUCTIONS FOR
ADDITIONAL COMPONENTS REQUIRED
TO MEET
EMISSION REQUIREMENTS ON THE D74XX/D74XXWDM
STAND ALONE UNITS AND D74XX-R3/D74XXWDM-R3 RACK UNITS.
POWER CABLE MUST HAVE A
FERRITE TOROID CORE
IFS P/N LB2643801002,
FAIR-RITE P/N 2643801002
INSTALLED NEAR THE CONNECTOR
WITH CABLE PASSING
THRU IT FIVE TIMES (FIVE
TURNS).
EACH ETHERNET CABLE MUST
HAVE A FERRITE CLAMP-ON
IFS P/N FL28A2029-0A0,
STEWARD P/N 28A2029-0A0
INSTALLED NEAR THE CONNECTOR
WITH CABLE PASSING
THRU IT TWICE (TWO TURNS)
.
REQUIRED FOR STAND
ALONE UNITS ONLY. REQUIRED FOR
STAND ALONE AND
RACK UNITS.