IC Realtime 2Mp Full HD 20x/30x Network PTZ Dome Camera (ICIP2001HD) - Manual (Page 27)

21
SCAN NO ： 001
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED ：160
RUN
STOP
BACK
EXIT
4.4.4.3 Scan
Move the cursor to SCAN button and then click confirm button.
z SCAN NO ：Here is to set auto scan number. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z SET LEFT LIMIT ：Here is to set camera left address. Click confirm button to save current setup.
z SET RIGHT LIMIT ：Here is to set camera right address. Click confirm button to save current setup.
z SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
z RUN: Please input auto scan number first, and then please move the cursor to RUN and click confirm
button to activate auto scan function.
z STOP: Here is to terminate auto scan function.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4.4 Cruise (Touring)
Move the cursor to highlight CRUISE item and then click confirm button to go to set interface.
z CRUISE NO ：Here is to ser tour number. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z CRUISE SETTING: Move the cursor to cruise setting item and then click confirm button. You can see
the following interface. Here you can add or remove the preset, and set the corresponding dwell time
and call speed.
„ DWELL: Here is t set dwell time. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
„ SPEED: Here you can set the speed value.
CRUISE NO： : 001
CRUISE SETTING
DELETE CRUISE
RUN
STOP
BACK
EXIT
NO PRESET DWELL SPEED
01 000 005 013
02 000 005 013
03 000 005 013
… … … …
32 000 005 013