CLIFFORD AVANT GUARD 4 - Manual (Page 5)

TO TURN VALET
MODE ON OR OFF: Press the master remote LevelShift button twice, then button 1 or press buttons and ✱ (companion remote) to enable/exit
valet mode.
TO RE MOTELY OPEN
OR VENT WIN DOWS: If you have this option, press the master remote LevelShift button once, then button 2 or press buttons and
(companion remote) after disarming to fully open the windows controlled by SmartWindows 4. On hot days, press this button
combination right after arming to vent the windows slightly while the system remains armed.
OTHER FEA TURES
AND OP TIONS: Other system features and options can be accessed as noted in the following Quick Reference table:
QUICK REF ER ENCE: RE MOTE CON TROL FUNC TIONS
Func tion
Companion Remote
Button(s)
Master Remote
LevelShift? Button
Arm or dis arm and lock or un lock the doors no 1
Optional wired ac ces sory #1* (usu ally optional trunk re lease) no 2
Silently arm or dis arm and lock or un lock the doors +
✱ no 3
Remotely start the engine (or shut it down in idling under AvantGuard 4’s control)
✱ no 4
Remote timed head light ac ti va tion 1 time 1
Unassigned or SmartWin dows 4 ac ces sory full open or post-arm venting* + 1 time 2
Optional wired ac ces sory #3* (usually IntelliVoice 4 voice synthesis on/off) +
✱ 1 time 3
Unassigned* + 1 time 4
Remote valet mode entry/exit +
✱ 2 times 1
Remote override of the Dual-Zone Proximity Sensor 4 + 2 times 2
LowTemp or LowBattery AutoStart, and manual transmission SafeStart 2 times 3
Unassigned* 2 times 4
Unassigned* 3 times 1
Unassigned* 3 times 2
Remotely adjust sensitivity of the optional Dual-Zone OmniSensor 3 times 3
Remotely adjust sensitivity of the Dual-Zone Proximity Sensor 4 3 times 4
* These but tons/chan nels can be as signed to con trol Clif ford sys tems and ac ces so ries on your other ve hi cles.
ACG 2 (Anti- CodeGrabbing 2™)
ACG 2 protects you and your automobile from code-grabbing devices. Code-grabbers record, from hundreds of feet away, the code sent by your car alarm
remote control (code-grabbers are very similar to, but simpler than, cellphone “cloning” devices). The thief then plays back the code when you’re gone,
instantly disarming the alarm and unlocking the doors. It’s like leaving your keys and remote in the door. Many non-Clifford alarms can be defeated that
easily, and some of the latest “smart” code-grabbers can even decipher the code hopping/jumping sequence used by other car alarm manufacturers. In
contrast, your AvantGuard 4 uses complex digital signal processing and unbreachable code encryption to randomly change the digital code every time you
use the remote control. Your remotes will never transmit the same code twice, and the control unit will never accept the same code twice. Thus the code
played back by the code-grabber — even the latest generation smart code-grabbers — will never be accepted by your AvantGuard 4 system.
Add ing new re mote con trols
For other drivers, or to control Clifford G4 systems on your other cars with the same remote, you can buy additional remote controls from any Clifford
Dealer (or direct from the Customer Service Department of your nearest Clifford Headquarters listed on the front cover) and program them into the
system yourself. AvantGuard 4 will respond to as many as four remote controls.
NOTE: Clifford G4 systems will re spond only to G4-type ACG 2 re mote con trols. Older Clif ford ACG and non- ACG
re mote con trols are not com pati ble with G4 systems.
To add a new master 5-button remote control, use the Add new master remote feature (column 1, row 1) of the User-selectable features table. To add a new
companion 4-button remote, program each button and button combination to the specific functions noted in column 4.
5