IC Realtime 7- inch Color Indoor Monitor (IHD7210) - Manual (Page 8)

normal status. You may exit anytime during the 45s by pressing unlock button.
2.5.2 Project Setup
This setup includes device info, network terminal, restore default settings.
1. Device info: includes room number, IP address, subnet mask, default gateway, MAC
address, and version info.
2. Network terminal: includes door station name, device type, door station ID
(manufacture use only), door station IP address, network port number, working status. You
may edit each item by clicking it (a numeric keyboard pops up). After you complete setup, click
the OK button on numeric keyboard.
3. Restore default settings: restore all project settings to default.
2.5.3 Product Introduction
This section mainly introduces product function and problems you may encounter during
usage.
2.6 Unlock Function
Under incoming call from door station, call with door station and VDP monitoring door
station, press unlock button to remotely unlock door.
2.7 Arm/Disarm Function
Under arm/disarm status, click arm button at the lower right corner of main menu, and
then select 1 from the 4 modes available (away, in, sleep and user mode). The password box
pops up, and you need to input password for arming. System will enter arming status after
delay ends. If you select instant arming, system will enter arming right after sound stops.
Under arm status, click disarm button at the lower right corner of main menu and
password box pops up. You need to input password for disarming. If you input correct
password, the system will disarm; if you input incorrect password, you will see a message
saying “incorrect password, please try again”.
2.8 Screen Calibration Function
This product screen was calibrated before shipped out. If you cannot activate icons on
screen when you touch it, please press unlock + arm/menu, and the product will enter screen
calibration interface. Following the cursor, click on the 5 cursors in sequence to complete
screen calibration. Once you have done, system will say screen calibration succeeds.