IC Realtime 7- inch Color Indoor Monitor (IHD7210) - Manual (Page 5)

Chapter 2 Basic Function Introduction
2.1 Main Menu
This product main menu consists of four menus, as video bidirectional talk, alarm, info
search, system setup: in main menu, upper-left corner is network connection, main door
station connection, DND setup and other status info, middle portion is current time(month, day,
week and time), lower-right corner is arm/disarm button which allows selection between arm
and disarm.
2.2 Video Talk Bidirectional Talk Function
2.2.1 Bidirectional Talk Function with Management Center
Under all interfaces, press SOS button or “call management center” icon, VDP will switch
to “calling management center” status, and a message will say “You are calling management
center” with corresponding beep. When call is answered, bidirectional talk begins. You may
end call by pressing SOS button again and VDP will return to standby interface.
When management center calls VDP, VDP will ring. You may press call button or “answer”
icon to answer call. You may end call by pressing call button again, and VDP will return to
standby interface.
2.2.2 Video Bidirectional Talk with Door Station
When door station calls VDP, VDP will ring and display video from door station. You may
press call bu
tton or “answer” icon to answer call and achieve bidirectional talk with the door
station. While VDP is displaying video from door station, you may end call and video by
pressing call button or “end” icon and VDP will return to standby interface.
2.2.3 Bidirectional Talk with VDP
Click to enter “video bidirectional talk” “call resident”, input the resident’s room number
(i.e. Room 101, Unit 1, Building 1, and input 1-1-101. For VDP in current unit, only room NO. is
required), click “call” icon (handset icon). The device will be in status of calling corresponding
VDP, and the page displays “You are calling XX-X-XXXX” with beeps. When the residents
answer, bidirectional talk is enabled. You may end call and video by pressing call button or
“end” icon. VDP will return to standby interface.
2.2.4 Monitoring Function
Under standby interface, press monitor button or under “video bidirectional talk” status
press “monitor”, and VDP will displays video from door station. Under monitoring interface, you