IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 23)

14
Port Name Connection Function
VGA VGA video
output port
VGA VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
GND / Alarm input port GND port.
Power input
port / Power port. Input 12V DC.
Power input
port / Switch power port. Input DC 48V.
PoE
PORTS 4 PoE ports / Built-in Switch supports PoE function.
The 4 PoE ports series product supports total
48V 50W.
USB 2.0 port / USB 2.0 port. Conenct to mouse.
Wireless AP Support wireless hotspot function. Use WIFI to
connect to the network camera when there is a
hotspot.
2.2.2 NVR708S2-P/NVR716S2-P/NVR732S2-P Series
The rear panel is shown as below. See Figure 2-6.
Figure 2-6
Please refer to the following sheet for detailed information.
Port Name Connection Function
USB2.0 USB2.0 port. / Connect to USB2.0 mouse.
Network port / 10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
RS232 RS232 debug
COM.
/ It is for general COM debug to configure IP
address or transfer transparent COM data.
HDMI High Definition
Media
Interface
/ High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA
VGA video
output port VGA VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.