HP LaserJet 4700 - Manual (Page 45)

To turn on the AutoSend feature
Use the following procedure to make the AutoSend feature available.
1 Make outgoing e-mail functions available by following the instructions that are listed in this
chapter. (For more information, see
E-mail Server .)
2 Select the Enable AutoSend check box.
3 Click an option to specify the interval at which you want the product to send the product-
configuration and supplies-usage information to the e-mail recipients (determined in the next
step), and then type the number of days, weeks, months, or pages printed.
4 For products with permanent storage devices installed, configure up to 20 destinations, using a
semicolon or comma to separate the addresses. (If you do not have a permanent storage device,
you can configure one e-mail address.)
5 To send device configuration and supplies status information to HP, select the Send to HP
check box.
6 Click Apply.
ENWW AutoSend 35
Settings